Jump to content
  • WELCOME GUEST

    It looks as if you are viewing PalmTalk as an unregistered Guest.

    Please consider registering so as to take better advantage of our vast knowledge base and friendly community.  By registering you will gain access to many features - among them are our powerful Search feature, the ability to Private Message other Users, and be able to post and/or answer questions from all over the world. It is completely free, no “catches,” and you will have complete control over how you wish to use this site.

    PalmTalk is sponsored by the International Palm Society. - an organization dedicated to learning everything about and enjoying palm trees (and their companion plants) while conserving endangered palm species and habitat worldwide. Please take the time to know us all better and register.

    guest Renda04.jpg

My germinating coconut from market :)


Recommended Posts

Posted (edited)

Hi, this is my germination coconut :)  I am really happy! :) Coconut is still in the bucket with heat set at 34 C and covered with foil to reduce evaporation heat.

My full tutorial Coconut Project 2017 is here  https://goo.gl/I074ux

Photos nr 3 - http://i.imgur.com/7HGDYp4.jpg

SAM_1169.JPG

SAM_1180.JPG

Edited by Ilovepalm
  • Upvote 11
Posted

Keep up the good work. :greenthumb: Do they already need some artificial light at this stage to encourage growth ?

  • Upvote 1
Posted

Very nice and clean looking sprout. Congratulations and good luck on your project!

 

  • Upvote 1

5 year high 42.2C/108F (07/06/2018)--5 year low 4.6C/40.3F (1/19/2023)--Lowest recent/current winter: 4.6C/40.3F (1/19/2023)

 

Posted

Very nice!  I've never had any success with it.  I'll have to try what you did and see if I have better results.

  • Upvote 1

Lakeland, FL

USDA Zone 1990: 9a  2012: 9b  2023: 10a | Sunset Zone: 26 | Record Low: 20F/-6.67C (Jan. 1985, Dec.1962) | Record Low USDA Zone: 9a

30-Year Avg. Low: 30F | 30-year Min: 24F

Posted (edited)

@kinzyjr - Don't worry. Me too not once failed. Try my guide https://goo.gl/I074ux (you have to use Google Translator). If you have any questions, write to PM. :) 

 

Edited by Ilovepalm
  • Upvote 1
Posted

After 41 days (you see a green sprout and root).

BSF1mAQ.jpg

  • Upvote 6
Posted

Would a reptile warming mat from a pet store be warm enough to encourage a coconut to sprout? 

Los Angeles, CA and Myrtle Beach, SC.

Posted
10 hours ago, Brad Mondel said:

Would a reptile warming mat from a pet store be warm enough to encourage a coconut to sprout?

Important, that the coconut was damp and wet conditions. How you want to heat this mat?

  • 8 months later...
Posted

Hello.

I"d like an advise, cause my coconut in ziplockbag with some warm water starting to moldy.

I let the bag on a heated mat for 21 days.....

So, nothing else than a ziplock bag, coconut and 1/2 cup of water, warm on heated mat.

Thank you

  • Upvote 1
Posted (edited)

@wagner You didn't changed your water during that 21 days? I think you should have done so, at least every day or so...

Edited by lapalmeraie
  • 5 months later...
Posted
On 10/9/2017, 10:13:28, wagner said:

Hello.

I"d like an advise, cause my coconut in ziplockbag with some warm water starting to moldy.

I let the bag on a heated mat for 21 days.....

So, nothing else than a ziplock bag, coconut and 1/2 cup of water, warm on heated mat.

Thank you

I would remove most of the water. In the third grade we just used a wet paper towel to control the moisture and had great success with beans and peas.

Ed Mijares

Whittier, Ca

Psyco Palm Collector Wheeler Dealer

Zone 10a?

Posted

I’m surprised that at the stage your in you have no roots. My root is half way down the nut and the sprout not green yet

Posted
7 hours ago, Rickybobby said:

I’m surprised that at the stage your in you have no roots. My root is half way down the nut and the sprout not green yet

I also had it. Sometimes it happens. You wait, watch.

  • 3 weeks later...
  • 5 months later...
Posted
On ‎10‎/‎9‎/‎2017‎ ‎12‎:‎13‎:‎28‎, wagner said:

Hello.

I"d like an advise, cause my coconut in ziplockbag with some warm water starting to moldy.

I let the bag on a heated mat for 21 days.....

So, nothing else than a ziplock bag, coconut and 1/2 cup of water, warm on heated mat.

Thank you

I have tried this as well with limited success.  I would advise to watch the temperature inside any container setting on a heat mat.  There is really no place for the heated water and temperature to dissipate(it can get really hot inside the container.  I set mine inside a zip lock bag, in a bowl on top of my water heater in the closet.  You have to check on the coconut every few days to make sure there is still water and also to wash off any fungi that may begin to grow before it gets to bad.  This is a real test of patience.  Sprouting was successful but then all failed.  I will be interested to see the success rate amongst you coco-heads :D.

jimmyt

Posted

Try the better heat mats with thermostats. You put a sensor right. By the seed and it will never it cook

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...