Jump to content
  • WELCOME GUEST

    It looks as if you are viewing PalmTalk as an unregistered Guest.

    Please consider registering so as to take better advantage of our vast knowledge base and friendly community.  By registering you will gain access to many features - among them are our powerful Search feature, the ability to Private Message other Users, and be able to post and/or answer questions from all over the world. It is completely free, no “catches,” and you will have complete control over how you wish to use this site.

    PalmTalk is sponsored by the International Palm Society. - an organization dedicated to learning everything about and enjoying palm trees (and their companion plants) while conserving endangered palm species and habitat worldwide. Please take the time to know us all better and register.

    guest Renda04.jpg

Recommended Posts

Posted

Anyone got one of these from Patric? If so, share a picture! Seems like potentially a nice cross for us in the southeast. Maybe enough Butia to let it tolerate our heat and humidity, but mostly Parajubaea and Jubaea for good looks. 

  • Upvote 2
Posted

I am not sure about the suitability of this hybrid for the southeast but for sure it is a very interesting cross. In many cases the genetics of the mother (Parajubaea) are dominant. Therefore I think this palm with its added cold tolerance would be great for cool, temperate climates in which Parajubaea might be not cold hardy enough (Southern UK, Oregon, coastal Washington).

Have I written "Southern UK" and "cool temperate climate" in the same sentence? I hope nobody gets upset:lol:.

Unfortunately it is quite expensive and time-consuming to get hybrids from Patric in Europe:bummed:.

  • Like 1
Posted
On 8/3/2020 at 8:24 PM, necturus said:

Seems like potentially a nice cross for us in the southeast.

Southeast Texas?  :P

Jon Sunder

Posted

In my mind I don’t necessarily clump Houston and Texas in with the southeastern US. I feel like we’re the middle ground between the southeast and the southwest. But from a climatic perspective it’s hard to separate Houston from the rest of the northern gulf coast (i.e. the southeast).

Anyways, since no one’s responded I thought I’d share a picture of my new specimen. I like that the trunk has a lot of girth for a small plant. I hope this means it’s going to close resemble the Parajubaea and less the Butia.

8DF69FA7-CE72-4142-89F0-37C07C08F642.jpeg

65A76FC3-A76D-435C-AA79-C58E04C8AE49.jpeg

  • Like 4
  • Upvote 1
Posted

Looking at pictures of baby Parajubaea cocoides, it looks pretty similar to me. Gonna cross my fingers and hope the Butia genes allow to survive here while looking more like P. cocoides.

Posted
1 hour ago, necturus said:

Looking at pictures of baby Parajubaea cocoides, it looks pretty similar to me. Gonna cross my fingers and hope the Butia genes allow to survive here while looking more like P. cocoides.

Looks great!  I'll hope right along with you.  Might be a fast grower too.  :)

Jon Sunder

  • 1 year later...
Posted

@necturus Amazing speciemn, has it grown much in the last year since you posted?

Posted

@Jamil Habib So far it's short and stout. Has pushed a couple pinnate leaves. I planted it right after this post but dug it up and potted it before our winter freeze. I am about to put it back in the ground in a new bed. 

IMG-0842.JPG

  • Like 3
  • 1 year later...
Posted
13 hours ago, beachbum said:

How's this guy looking now?

It's only a little bigger. And it's sitting under frost cloth at somewhere around 18 degrees F. 😑 It's close to the south side of the house, so hopefully it'll make it.

Posted

Got Patrick’s last PJCxB/J in October when I visited his place, 15gal. And the last pic is his. Very green, stout and stiff. A favorite of mine. I’d like the reverse BJxParajubaea if that ever comes around. 

C159D4C8-40F6-4129-BA09-0D264CE13D24.jpeg

51E7756A-5962-4D8B-8042-D7905780652F.jpeg

04E2CDA0-5F4D-4FF4-8AE4-AC41F4A647CB.jpeg

  • Like 4
  • 2 weeks later...
Posted

got mine on September 2020, was quite quick grower, i put it in ground by the end of February 2022.

FB_IMG_1672920626989.thumb.jpg.9feead39afae91692c024cf7ff8346d9.jpg

FB_IMG_1672920630815.thumb.jpg.ffa494cd263e6251886a7984d616fd9b.jpg

FB_IMG_1672920634029.thumb.jpg.be91378271fa10f549d43a723592e4f9.jpg

FB_IMG_1672920670910.thumb.jpg.08b9e7ef72db1038ee26c32bbba41266.jpg

FB_IMG_1672920637718.thumb.jpg.aae33896ba2f4d886c479575e3b1a8c6.jpg

FB_IMG_1672920645210.thumb.jpg.33fa1f4c383b71039f852ac38634dbd6.jpg

FB_IMG_1672920641588.thumb.jpg.fa1a62f4e429eb3a584d232fb0f3b5aa.jpg

  • Like 5
  • 1 year later...
Posted

one year later, it took a short 23F under a polycarbonate greenhouse this winter, without damages. lower frond got more cold and are more brown, i think leaves burns around 20/21F.

 

IMG_20240407_125254.thumb.jpg.ead6ed62fe2104cff06adad0157dd698.jpg

 

IMG_20240314_134820.thumb.jpg.0aec2d5ab3935fb1f9779125e3b3488a.jpg

 

anyone has a larger one ?

IMG_20240407_125250.jpg

  • Like 5

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...