Jump to content
  • WELCOME GUEST

    It looks as if you are viewing PalmTalk as an unregistered Guest.

    Please consider registering so as to take better advantage of our vast knowledge base and friendly community.  By registering you will gain access to many features - among them are our powerful Search feature, the ability to Private Message other Users, and be able to post and/or answer questions from all over the world. It is completely free, no “catches,” and you will have complete control over how you wish to use this site.

    PalmTalk is sponsored by the International Palm Society. - an organization dedicated to learning everything about and enjoying palm trees (and their companion plants) while conserving endangered palm species and habitat worldwide. Please take the time to know us all better and register.

    guest Renda04.jpg

Lighting your palms.


3 Milesfrom Gulf of Mexico

Recommended Posts

What does everyone use or recommend for their uplighting for their palms to illuminate them at night?  On my Roystonea regia I use a standard yellow flood light.  Post some pictures of your palms illuminated at night and let them show you their night time colors.  

52730CC7-18E7-40E3-9386-2CE7191A86C3_1_105_c.jpeg

Link to comment
Share on other sites

Mate, I don't have any pics on hand but I have ripped out all of my coloured lights. I had green, red, blue, purple and colour changing. They were all horrible. 

Stick to warm white the most natural and pleasing.

And keep the wattage low, allow for the effect to be pleasant after your eyes have night adjusted, keep the bright cool white light for your kitchen.

 

  • Like 1

Cheers Steve

It is not dead, it is just senescence.

   

 

 

Link to comment
Share on other sites

youre about 45 minutes away from Volt Lighting in Lutz. 

i have 50+ led fixtures @3000 kelvin for a slightly whiter look 

E2A1422B-07F9-4A76-88B3-8A3EB8E64F80.jpeg

B3696377-F0C7-4105-BCE3-320BF94E65D8.jpeg

  • Like 6

The Palm Mahal

Hollywood Fla

Link to comment
Share on other sites

The brightest illumination off your palm per lumen of light launched will be green.  One year at christmas I decided to uplight my sabal causiarum, bismarckia and copernicia fallaensis and bailey so I purchased 2 lights which had RGB switch for color and also a white color.  When shining them up on these 20-30' foof tall palms and other palms I noticed a few things about leaves and light reflection.

1) first fan palms reflected far more light than pinnate palms in my yard.  This is probably due to all the angles of reflection coming off all those leaflets.  Among feathers, the more rigid planar ones reflected the most(kentiopsis was the best reflector, archies were pretty good).   Its kind of like a disco ball vs a flat mirror, all those little reflecting surfaces scatter the light.  My royals were not reflecting much off the leaflets at 35', LOL!

2) of the fan palms, bismarckia with its waxy white leaf reflected the most light, next brightest was fallaensis with causiarum and (green) bailey notably less light than the first two.  darker green fan palms reflected less light, not much.  I dont have pics but the effect on the big fan palms created a huge 3D image of their forms in the darkness, walking among them overhead with all the leaf definition in  reflected light in the darkness was amazing.

white is of course ~Red plus green plus blue(though LED' are more narrow band) and chloropbhyll absorbs in the red very strongly and the blue also strongly but green light is not absorbed by the chlorophyll and other leaf chromophores.  So not surprisingly, a 3(?) watt green bulb was reflecting brighter than the same wattage white bulb, yes green reflected the most light on all palms.  Red was so strongly absorbed that when I used the red light I thought it had become unplugged at first.  I couldn't even tell it was on in a neighborhood where people had put up their christmas lights(not pitch darkness).  I tried later after they shut them off and I wasn't sure I could tell if the red light was on.  The blue gave the palm a very mild glow that had me asking, is that all there is? I could not make out leafshapes in the darkness with the blue light  Then I went to green by itself and the palm leaves lit up in their glory with detail, it was hard to believe unless you conduct this experiment for yourself.  The green LED was brightest since to a first approximation all 3(?) watts were green light as passed the leaves while with the white light maybe 1 watt (lumen equivalent) was green light, 1 red and one blue(aapprox) and the red and blue light dont pass through the chlorohyll.  Here is the photosynthetic absorbance rate of chlorophyll, A, B and for carotenoids which are also significant.  Seems like a green and yellow combined will get you the most radiance per watt. 

image.thumb.png.521715c4ae9fb19760f2c7d0fa8a5926.png

Formerly in Gilbert AZ, zone 9a/9b. Now in Palmetto, Florida Zone 9b/10a??

 

Tom Blank

Link to comment
Share on other sites

Of course you can use a 600 watt broad spectrum white bulb but ~ 400 watts equivalent in blue and red light is wasted when reflected on leaves.  5000 Kelvin in the figure below will get you the brightest image based on its green/yellow wavelength centroid.  None of these lights actually looks natural to me, kind of hard to do that with unnatural light to start with.  But better reflectance with less power makes for much less eyestrain and yet good illumination.  Trunks, especially white trunks, I do not want to illuminate with my spots since they would wash out the illumination in the leaves.  SO I just illuminate the crowns and my yard looks like a bunch of huge crowns suspended there.

 

Blackbody Radiation – University Physics Volume 3

  • Like 1
  • Upvote 1

Formerly in Gilbert AZ, zone 9a/9b. Now in Palmetto, Florida Zone 9b/10a??

 

Tom Blank

Link to comment
Share on other sites

18 hours ago, waykoolplantz said:

pics please Tom

Sorry mike, I need a tripod for my camera as the light levels are very easy on the eyes but very tough on camera shutter speeds.  To get the "ghosty crown effect" overall light needs to be low and very directional, and white trunks should not be illuminated as they will dominate the aperature.  Its great for christmas and haloween, the bizzie and sabal look particularly spooky with their leafshapes.  These lights were LED's and just 3-6(?) watts but plenty to light up the crowns to a nice glow in the darkness.   I need to get a tripod for my Canon 60D and take some shots to see how they come out. 

Formerly in Gilbert AZ, zone 9a/9b. Now in Palmetto, Florida Zone 9b/10a??

 

Tom Blank

Link to comment
Share on other sites

  • 3 years later...

Still sooooo much more to do on this part of the yard, but seeing parts lit up at night is sure rewarding…

IMG_9587.thumb.jpeg.2cff491fc33222270d4498e13277744d.jpeg

So far it’s mostly lighting the waterfall, palapa and ferns, but the Hyophorbe indica and Chambeyronia houailou can be seen as well. More palms hopefully going in this Spring. 🤞

  • Like 5

Stacey Wright  |  Graphic Designer

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...