Jump to content
  • WELCOME GUEST

    It looks as if you are viewing PalmTalk as an unregistered Guest.

    Please consider registering so as to take better advantage of our vast knowledge base and friendly community.  By registering you will gain access to many features - among them are our powerful Search feature, the ability to Private Message other Users, and be able to post and/or answer questions from all over the world. It is completely free, no “catches,” and you will have complete control over how you wish to use this site.

    PalmTalk is sponsored by the International Palm Society. - an organization dedicated to learning everything about and enjoying palm trees (and their companion plants) while conserving endangered palm species and habitat worldwide. Please take the time to know us all better and register.

    guest Renda04.jpg

Help! Windmill palm zone pushing question


Maximum

Recommended Posts

Hi 👋 

FYI This is kinda long. You can skip down to the end to see the actual question. I included some additional info you may not find necessary. 

I recently moved from SW Florida to SW Michigan
 it’s not that the cold bothers me all that much but I miss the palm trees 😞 

Forgive me if this question has already been answered but I’ve searched this site and others and haven’t found my exact question
 

In SW Michigan, zone 6A, I know I can grow windmill palms if I protect them SUPER WELL WITH EXTENSIVE WINTER PREP like spraying them with a fungicide, tying up the fronds, wrapping the entire palm with heat tape, using a thermocube, wrapping a layer of burlap around it, putting an insulation box around it with an insulated lid to keep the temps around 35-40 degrees Fahrenheit (with the thermocube), and heavily mulching the ground on the outside of the insulation box


I can provide all those winter protections if necessary, but only for the windmill palms I plant close to the house and here in SW Michigan I have a large piece of land and I’d love to plant some windmill palms a bit closer to the road so people driving by might enjoy them spring-fall (my house is way far back off the road). I don’t know of a way to power a heat source if I plant them closer to the road (far away from the house). 

So here’s the question


Do windmill palms grown in SW Michigan zone 6A specifically need to be protected in the winter months with a HEAT SOURCE or should insulating them from rapid temperature changes without adding a heat source be enough??? 

- Max 

 

 

 

Link to comment
Share on other sites

  • Maximum changed the title to Help! Windmill palm zone pushing question

You will need to run electric to them with a heat source.   Foam box method and Christmas lights inside

  • Like 1

YouTube https://www.youtube.com/@tntropics - 60+ In-ground 7A palms - (Sabal) minor(8 large + 27 seedling size, 3 dwarf),  brazoria(1) , birmingham(3), etonia (1) louisiana(4), palmetto (1), riverside (1),  tamaulipas (1), (Trachycarpus) fortunei(7+), wagnerianus(1+),  Rhapidophyllum hystrix(7),  22'  Mule-Butia x Syagrus(1),  Blue Butia odorata (1), Serenoa repens (1) +Tons of tropical plants.  Recent Yearly Lows -6F, -1F, 12F, 11F, 18F, 16F, 3F, 3F, 6F, 3F, 1F, 16F, 17F, 6F, 8F

 

Link to comment
Share on other sites

4 minutes ago, SeanK said:

Build a conservatory

Yeah, that’d be cool. I’ve always dreamed of having one, but I can’t imagine the cost to build one is reasonable. But you never know, maybe someday! 

Link to comment
Share on other sites

3 minutes ago, Allen said:

You will need to run electric to them with a heat source.   Foam box method and Christmas lights inside

Darn. I can’t say I’m surprised but I was hoping since windmill palm are one of the cold hardiest that they’d be able to adapt so long as they’re protected from wind and big temp fluctuations in an unheated insulated box
 Sounds like I’ll have to be sure to plant them close to the house then so I can heat them up! I appreciate it!

Link to comment
Share on other sites

2 minutes ago, CascadiaPalms said:

insulation can only do so much, especially in your zone.  Heat source will be needed.

Thank you 😊 

Link to comment
Share on other sites

2 minutes ago, Maximum said:

Thank you 😊 

No prob.  Don't get me wrong I LOVE Trachy's!  But have you tried a Needle Palm?  These guys are extremely tough from the cold.  I ranked them number #1 on my YT video for most cold harder palm.

Link to comment
Share on other sites

This may be impossible, but in the slim chance that anyone’s had success in zone 6A winterizing windmill palms without supplying a heat source, let me know. I’d love to hear about it! I know, I know I’m really stretching it here. Too bad I don’t live in Macatawa, Michigan where it’s zone 7A 😔 

Link to comment
Share on other sites

1 minute ago, CascadiaPalms said:

No prob.  Don't get me wrong I LOVE Trachy's!  But have you tried a Needle Palm?  These guys are extremely tough from the cold.  I ranked them number #1 on my YT video for most cold harder palm.

Yes I’m considering having needle palms and sabal minors as well AND Musa basjoos. Great, I’ll check out your YouTube channel! 

  • Like 1
Link to comment
Share on other sites

1 hour ago, Maximum said:

... Sounds like I’ll have to be sure to plant them close to the house then so I can heat them up! ...

Just how warm do you plan on heating your house as to "heat them up" ?

Link to comment
Share on other sites

Close to the house so I have an outlet to plug in some Christmas lights to keep the palms from freezing  

  • Like 1
Link to comment
Share on other sites

2 hours ago, Maximum said:

Hi 👋 

FYI This is kinda long. You can skip down to the end to see the actual question. I included some additional info you may not find necessary. 

I recently moved from SW Florida to SW Michigan
 it’s not that the cold bothers me all that much but I miss the palm trees 😞 

Forgive me if this question has already been answered but I’ve searched this site and others and haven’t found my exact question
 

In SW Michigan, zone 6A, I know I can grow windmill palms if I protect them SUPER WELL WITH EXTENSIVE WINTER PREP like spraying them with a fungicide, tying up the fronds, wrapping the entire palm with heat tape, using a thermocube, wrapping a layer of burlap around it, putting an insulation box around it with an insulated lid to keep the temps around 35-40 degrees Fahrenheit (with the thermocube), and heavily mulching the ground on the outside of the insulation box


I can provide all those winter protections if necessary, but only for the windmill palms I plant close to the house and here in SW Michigan I have a large piece of land and I’d love to plant some windmill palms a bit closer to the road so people driving by might enjoy them spring-fall (my house is way far back off the road). I don’t know of a way to power a heat source if I plant them closer to the road (far away from the house). 

So here’s the question


Do windmill palms grown in SW Michigan zone 6A specifically need to be protected in the winter months with a HEAT SOURCE or should insulating them from rapid temperature changes without adding a heat source be enough??? 

- Max 

 

 

 

I don't grow Trachycarpus here in MI, but I would say they definitely would need a heat source for the winter.

My Youtube: https://www.youtube.com/@dts_3
Palms in Ground Currently: Rhapidophyllum Hystrix (x1), Butia Odorata (x1), Sabal Causiarum (x2), Sabal Louisiana (x1).

Link to comment
Share on other sites

3 minutes ago, Maximum said:

Thank you! Do you grow needle palms? 

Yeah, I do!IMG_6652.thumb.jpeg.df3c3d345474c2cb019b5bcaf779c752.jpeg

  • Like 1

My Youtube: https://www.youtube.com/@dts_3
Palms in Ground Currently: Rhapidophyllum Hystrix (x1), Butia Odorata (x1), Sabal Causiarum (x2), Sabal Louisiana (x1).

Link to comment
Share on other sites

6 minutes ago, Maximum said:

Beautiful! Do you protect it during the coldest months? 

Yeah, usually is covered from mid November to maybe late February early March

My Youtube: https://www.youtube.com/@dts_3
Palms in Ground Currently: Rhapidophyllum Hystrix (x1), Butia Odorata (x1), Sabal Causiarum (x2), Sabal Louisiana (x1).

Link to comment
Share on other sites

You tie the fronds up? A burlap wrap or an insulated box? No heat source I assume? 

Link to comment
Share on other sites

4 minutes ago, Maximum said:

You tie the fronds up? A burlap wrap or an insulated box? No heat source I assume? 

I use frost cloth with cristmas lights, and a pop up greenhouse to keeep snow/water/ice out. I doubt it would be very happy after 7 days below 30 degrees in January. That's what I'm doing to my other palms.

My Youtube: https://www.youtube.com/@dts_3
Palms in Ground Currently: Rhapidophyllum Hystrix (x1), Butia Odorata (x1), Sabal Causiarum (x2), Sabal Louisiana (x1).

Link to comment
Share on other sites

43 minutes ago, Maximum said:

Very nice! What other palms are you growing in the same way? 

Butia Odorata, Sabal Louisiana and Causiarum, and a Cycad

My Youtube: https://www.youtube.com/@dts_3
Palms in Ground Currently: Rhapidophyllum Hystrix (x1), Butia Odorata (x1), Sabal Causiarum (x2), Sabal Louisiana (x1).

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Recently Browsing

    • puddingnpie
    • DTS
    • Maximum
×
×
  • Create New...